Dear Readers ,
As I mentioned in mybiodynamic post ; JimJim very kindly made me a elevate bed to avoid contamination from his gardening method .
So step by step , this is how we ( ok , he ) did it :
Tools you need
1 . Gather the equipment you call for :
eye protectionglovessawpencilmeasuring tapenuts , deadbolt / nailsscrewdriver or a screwdriver moment for the drillbrackerswood
2 . Measure and cut
Tools you need
Our beds are 8 feet wide by 12 feet long .
3 . Lay it out and see the size of it , shape and that you ’ve trim back it properly
4 . Once you ’re glad with the layout , you could decamp on the hinges or blast the planks together
Measure Twice, Cut Once
5 . If you have put the skeleton together somewhere else , enlist the help of a neighbour with beer and move it to where it require to go .
6 . shroud with composition board to bottle up the grass
Overlap the edge to slim the likelihood of grass or dope coming through .
Grizzly Photobomb
7 . Flatten the cardboard down and delay for gaps in the layers
8 . If desired add another layer of mulch such as Gunter Wilhelm Grass press cutting . We added some raked leaves from the orchard at my old house .
9 . Cover the menu with compost or territory
Fasten together
10 . Level the filth then institute up
Share this:
Sparky Photobomb
JimJim hard at work
